Created on 12/14/2016
c
2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 1 of 2
MODEL
RBAT
Direct-acting relief valve with carbide pilot ball - pilot capacity
SERIES 1 / CAPACITY: 1 L/min. / CAVITY: T-10A
Direct-acting, pilot relief cartridges are used to remotely control the pressure setting of other pilot-operated valves.
Because capacity is limited to pilot flow, these valves should be used with other higher flow valves.
TECHNICAL DATA
Cavity T-10A
Series 1
Capacity 1 L/min.
Maximum Operating Pressure 350 bar
Response Time - Typical 2 ms
Maximum Valve Leakage at 110 SUS (24 cSt) 0,3 cc/min.
Adjustment - Number of Clockwise Turns to Increase Setting 5
Valve Hex Size 22,2 mm
Valve Installation Torque 41 - 47 Nm
Adjustment Screw Internal Hex Size 4 mm
Locknut Hex Size 15 mm
Locknut Torque 9 - 10 Nm
Seal kit - Cartridge Buna: 990010007
Seal kit - Cartridge Polyurethane: 990010002
Seal kit - Cartridge Viton: 990010006
Model Weight 0.14 kg.
(L)CONTROL
L Standard Screw Adjustment
C Tamper Resistant - Factory Set
Q Capped and Lockwired
T Tamper Proof - Factory Set
(A)ADJUSTMENT RANGE
A 100 - 3000 psi (7 - 210 bar), 1000 psi
(70 bar) Standard Setting
C 150 - 6000 psi (10,5 - 420 bar), 1000
psi (70 bar) Standard Setting
W 150 - 4500 psi (10,5 - 315 bar), 1000
psi (70 bar) Standard Setting
(N)SEAL MATERIAL
N Buna-N
V Viton
snhy.com/RBAT
TECHNICAL FEATURES
Main stage orifice is protected by a 150 micron stainless steel screen.
Model Code Example: RBATLANCONFIGURATION OPTIONS
Created on 12/14/2016
c
2016 Sun Hydraulics Corporation See www.sunhydraulics.com for detailed product information 2 of 2
Suitable for use in load holding applications.
Back pressure on the tank port (port 2) is directly additive to the valve setting at a 1:1 ratio.
Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge
machining variations.
PERFORMANCE CURVES
